|HOME|
ATMIX can produce granulated powder having good flowability suited for
conventional press compaction by original granulation technology using
own fine powder.
The granulated powders make it possible to get higher densities,95% or
more, for sintered parts.
| Granulated powder size |
Fine powder | Granulated powder | |||||
|---|---|---|---|---|---|---|---|
| Nominal size |
D50 (µm) |
T.D. (g/cm3) |
Specific surface area (m2/g) |
D50 (µm) |
Flow rate (sec/50g) |
Apparent density (g/cm3) |
|
| GR0508 | PF-5F | 4.0 | 3.9 | 0.46 | 130 | 30 | 2.2 |
| GR1008 | PF-10F | 6.1 | 4.1 | 0.32 | 150 | 32 | 2.2 |
| GR2008 | PF-20F | 10.3 | 4.5 | 0.20 | 120 | 32 | 2.2 |
| Raw material(Fine Powder) | Granulated Powder |
  |
 |
| Granulated powder | Conv.P/M (-100mesh) |
|||
|---|---|---|---|---|
| GR0508 | GR1008 | GR2008 | ||
| Tensile strength(MPa) | 644 | 575 | 427 | 340 |
| Hardness HRB | 80.6 | 77.1 | 65.9 | - |
