We produce a wide variety of magnetic powders.
These powders are of varying composition and of varying size distribution and widely used for sintered magnet and dust core.In particular,we can produce super fine powder having diameter of less than 10µm and also amorphous powder by super rapid cooling (more than 106K/s).
These powder are best suited for higher frequency,higher current application.

Material and Properties of Magnetic Powder

Typical Properties of Amorphous Powder by High Pressure Water Atomization

Type
of
steel
Particle
size
(Grade)
Chemical compositions (%) Mean
size
(µm)
Tap
Density
(g/cm3)
O
(ppm)
Mm
(emu/g)
Hc
(Oe)
True
Density
(g/cm3)
C Si Mn Ni Cr Al
Fe-3.5
Si
PF-20F 0.01 3.5 0.0 0.0 0.0 - 11 4.3 4,300 205 10.3 7.6
-75µm 40 - 2,800 205 8.0
Fe-3.5
Si-4.5
Cr
PF-20F
(H.T.-
800°)
0.01 3.5 0.1 0.0 4.5 - 11 4.3 2,500
(1,600)
190
(195)
14.2
(10.3)
7.6
-53µm 39 - 890 190 10.1
-150µm 60 - 800 190 8.9
Fe-50Ni
(PB)
PF-20F
(H.T.-
800°)
0.01 0.3 0.0 49.9 0.0 0.0 10 4.5 1,800
(1,100)
155
(155)
12.8
(3.1)
8.2
Fe-Si-Al
(Sendust)
PF-20F
(H.T.-
800°)
0.01 10.0 0.1 0.0 0.0 5.7 10 4.0 3,500
(3,600)
110
(110)
4.0
(2.0)
7.1
AW2-08
(Amor-
phous)
PF-20F
(H.T.-
500°)
Fe-Si-B-Cr type 11 4.4 1,600
(1,600)
150
(150)
1.6
(0.7)
7.0

Typical Properties of Amorphous Powder by SWAP
(Spinning Water Atomization process)

KUAMET-6B2
(Amor-phous)
-150µm
(H.T.-500°)
Fe-Si-B-Cr type 50 4.6 300
(-)
150
(150)
1.2
(0.5)
7.0

Powder Shape

Magnetic Property(Core loss)

Materials
Fe-Si base, Fe-Si-Cr base, Fe-Si-Al base, Fe base, Co base amorphous, Fe-Nibase, Fe-Cobase
Main Application
Choke Coi, SMD Coil, Reactle, Noise Filter Shee, Convergence Ring
Amorphous Core SMD Coil